The new AEON Shisha - Edition 4 is the successor to the Edition 3 and has been developed & continuously tested over a year. The AEON hookahs are produced in Germany under the highest quality standards made of V2A stainless steel (1.4305 V2A stainless steel from Switzerland) near Stuttgart and then every component of the AEON hookah subverts once again a strict quality control in our warehouse. The production of shishas in Germany is carried out with the ISO 9001 and ISO 14001 certification and every thread is checked on the spot for accuracy of fit. The bowls of the AEON hookah are mouth-blown in elaborate handwork and then checked for quality in our warehouse and glued with a high-quality 2-component adhesive. So, if you buy an AEON hookah, you can be sure

Scope of delivery of the Edition 4 - Lounge

- Head adapter with M16x1 thread

- Charcoal plate (hand ground from V2A stainless steel)

- 18/8 cut to M16x1 adapter

- Smoke column with 29/2 bottom cut (M14x1 thread inside to attach to the base) and 18/8 ground cut above

- Base with one connection incl. Closed chamber and blow-off valve on the smoke column

- 1 x hose end with shortened 18/8 cut

- 1 x sockets incl. 6mm ball for blowing out

- Immersion tube with M14x1 thread at top and bottom

- Bowl with thread

How is the Edition 4 - Lounge different in comparison to other Shishas?

In the Edition 4 we have developed a new blow-out valve, which leads the smoke upwards along the smoke column. This system also works if you attach other smoke columns to the Edition 4 (for example, with the optional "Base Adapter"). We also offer other smoke columns that are compatible with the Edition 4 and the position of the blow-off valve can be changed. The entire technology of the blow-off valve is elegantly hidden in the base and barely visible from the outside. The base has a 29/2 cut, which means you can customize the Edition 4 to your liking. For example, other 29/2-style smoke columns fit easily into the base and you can customize the look of your hookah at any time. The smoke column, which is included in the Edition 4, is first inserted into the 29/2 ground joint of the base and then screwed to the dip tube with M14x1 thread. Because the column of smoke has a 18/8 cut above, you can also attach a Molasse catcher or other 18/8 cut parts and adjust the height of Edition 4 to your liking.

How is the Edition 4 - Lounge different from the other Edition 4 variants?

The Edition 4 - Lounge is specially designed for use in shisha bars. Few components, a simple design but a modern simple design with a beautiful blow-off valve (as in the other Edition 4 variants) ensure that the Edition 4 - Lounge is a real eye-catcher in every Shisha Lounge. On a diffuser was extra dispensed with, because in Shishabars you can hear the "bubbling" of the hookah. However, a matching diffuser for the Edition 4 is available as an option and can be attached to the immersion tube of the Edition 4 - Lounge without any problems. The smoke column consists of a part and is left in 29/2 ground into the base and then screwed firmly to the dip tube, so that you could wear the Edition 4 - Lounge also on the entire smoke column. Under the plate is a 18/8 cut, so that the carbon plate can be easily removed, for example, for a head change. Also Molassecatcher could be attached as needed. A shorter dip tube could also be attached to the Edition 4, the dip tubes of different variants are compatible with each other.

Shisha dimensions:

Height: approx. 53 cm

Weight: 4.20 kg

Aspire Proteus Neo Coil

Description

Newsletter